Safety In 30 Days Personal Protective Equipment In The Workplace

Safety in​ 30 Days,​ Personal Protective Equipment in​ the​ Workplace
Safety in​ 30 Days,​ Personal Protective Equipment in​ the​ Workplace
There are ways that employers should identify and assess risks with a​ view to​ preventing and reducing them. There should be a​ hierarchy of​ prevention and control measures starting with prevention of​ the​ risk,​ and if​ this is​ not possible,​ technical/engineering controls,​ safe systems of​ work and information or​ training should be used instead. Personal protective equipment should only be used as​ a​ last resort.
Unfortunately,​ some employers encourage workers to​ use personal protective equipment without ever considering the​ introduction of​ prevention and control measures that could eliminate the​ use of​ personal protective equipment. This leads to​ a​ number of​ problems
Personal protective equipment protects only the​ person wearing it,​ whereas measures controlling the​ risk at​ source can protect everyone at​ the​ workplace
Theoretical maximum levels of​ protection are seldom achieved with personal protective equipment in​ practice and the​ actual level of​ protection is​ difficult to​ assess
Protection is​ often ineffective because the​ personal protective equipment is​ not suitable,​ incorrectly fitted,​ not properly maintained,​ and may be used improperly
Personal protective equipment may restrict the​ wearer by limiting mobility or​ visibility,​ or​ by requiring additional weight to​ be carried. as​ well as​ the​ health and safety problems that this may cause,​ it​ can also lead to​ a​ ‘blame the​ worker’ culture when the​ personal protective equipment is​ discarded because of​ the​ discomfort that it​ can cause
Using personal protective equipment in​ a​ hot climate can be very uncomfortable for the​ worker. For example,​ using a​ fullface mask and body protection in​ full sunshine during the​ hot season can be almost impossible. it​ can result in​ dehydration,​ headaches and even fainting
Different types of​ personal protective equipment include
helmet or​ headprotector
hearing protectors such as​ earplugs or​ earmuffs
eyeprotectors such as​ goggles and face shields
breathing masks with different types of​ filters
gloves of​ different material
safety footwear
protective aprons,​ overalls or​ clothing
wet weather protective clothing
safety belts and lifelines
Hazards even where technical or​ engineering controls,​ safe systems of​ work and other techniques have been applied,​ it​ is​ possible that some hazards might remain. These hazards may lead to​ injuries to​ the
lungs,​ for example,​ from breathing in​ contaminated air
head and feet,​ for example,​ from falling materials
eyes,​ for example,​ from flying particles or​ splashes of​ corrosive liquids
ears and hearing from noise
skin,​ for example,​ from contact with corrosive materials
body,​ for example,​ from extremes of​ heat or​ cold
Sometimes,​ personal protective equipment is​ needed in​ these cases to​ reduce the​ risks,​ but only to​ supplement the​ other risk control measures already put in​ place.

You Might Also Like:

Powered by Blogger.