Cnc And Cad Software How Do I Choose The Right Cad Program For Me

Cnc And Cad Software How Do I Choose The Right Cad Program For Me



CNC And CAD Software - How Do I​ Choose the​ Right CAD Program For Me?
There are multiple CAD programs available for design .​
Generally people become familiar with one and stick with it .​
As far as​ selecting the​ right one,​ my advice is​ this .​
Most software companies have a​ free trial .​
Thirty-day trials are common .​
Take advantage of​ these trial periods and test the​ software out .​
Then at​ the​ end,​ decide if​ you​ want to​ try another software or​ stick with your best one .​
I​ would advise you​ try out at​ least three different packages.
The one you​ select will probably have to​ do with you​ liking the​ interface or​ finding it​ intuitive .​
Keep in​ mind it​ may work for you​ now .​
a​ simple to​ use and understand interface probably has some limitations for your designs .​
The very best programs are complex with many tools that give you​ the​ most control .​
I​ have found that I​ start with a​ simple program and outgrow it .​
At some point I​ move up to​ the​ next level of​ software .​
This usually means a​ higher price as​ well.
Types of​ CAD
There are different types of​ CAD out there .​
These are the​ ones I​ deal with from time to​ time .​
2D CAD,​ 2.5D CAD,​ and 3D CAD .​
Here are some quick explanations of​ each type.
2D CAD
2D CAD is​ generally on​ the​ low end of​ CAD software packages .​
2D CAD is​ most often vector based .​
The design consists on​ the​ X and Y-axis only .​
The designs are made up of​ lines,​ circles,​ ovals,​ slots,​ curves,​ etc .​
There is​ no depth to​ the​ design .​
Only the​ outline of​ the​ part is​ visible,​ to​ put it​ in​ a​ different way.
2.5D CAD
All of​ the​ same descriptions above apply,​ but the​ design is​ prismatic .​
By that I​ mean it​ has the​ depth of​ the​ material .​
There are Z levels,​ but they are on​ singular planes.
3D CAD
3D CAD is​ on​ the​ high end of​ CAD software packages .​
3D CAD can be solid based,​ wire frame based or​ nurbs based .​
The design consists on​ the​ X,​ Y and Z-axis .​
The designs are made up of​ lines,​ circles,​ ovals,​ slots,​ curves,​ etc,​ but can also include Spheres,​ Pyramids,​ Torrids,​ Cubes,​ etc .​
There is​ depth to​ the​ design .​
The design can be rotated around 360 degrees .​
The design is​ an​ accurate description of​ what the​ part would look like if​ produced in​ the​ real world.




You Might Also Like:




No comments:

Powered by Blogger.