Bicycle Maintenance

Bicycle Maintenance



Learning to​ ride a​ bike is​ no big deal. if​ you​ fall off, just brush yourself off and​ climb back on. Learning how to​ keep your​ bike from falling apart can be just as​ easy.

Bicycle maintenance is​ vital to​ the performance and​ preservation​ of​ your​ ride. Without proper maintenance, your​ bike will quickly go from a​ lean, mean, two-wheeled machine, to​ a​ squeaky, rusty, pant leg munching mess. Keeping your​ bicycle in​ top condition​ requires regular protective and​ preventive maintenance, some of​ which can be done by you. Other jobs may require the skills of​ a​ professional cycle repairer.

Tires
When riding a​ bicycle, most of​ the load and​ pressure falls directly on​ the tires. Check your​ air pressure to​ be sure the tires are inflated as​ per the manufacturer's specifications. Tires should be inspected on​ a​ regular basis for​ any signs of​ ripping, or​ wear and​ tear. Wheels need regular tuning and​ adjustment, and​ should be checked for​ dents and​ twists caused by collisions or​ falls. Spinning is​ the best way to​ check a​ wheel. if​ the wheel shakes from side to​ side as​ it​ spins, it​ will need to​ be tightened. Spokes also need to​ be tightened and​ fixed firmly to​ the rims as​ part of​ regular bicycle maintenance. The spokes transmit pressure, so if​ they're damaged they must be replaced immediately.

Handlebar
Similar to​ the steering wheel of​ a​ car, the handlebar is​ a​ key component in​ maneuvering the bicycle. a​ handlebar needs to​ be adjusted to​ produce the best results. Adjust the height so that you​ can comfortably hold the handlebar when seated. The handlebar should be properly aligned with the front wheel, to​ accommodate both quick swerves and​ smooth changes in​ either direction. a​ properly adjusted front fork is​ equally important. The front fork stabilizes the handlebar and​ should be securely fastened to​ the handlebar post. Also, be sure that your​ bicycle maintenance regime includes checking that the pedals are tightly secured.

Brakes
The single most important part of​ the bicycle for​ rider safety is​ the brake assembly. Check the brakes by squeezing them and​ rolling the bike ahead. if​ the brakes work properly, the wheels will not roll and​ the brake pads will stay squarely on​ the rims without touching the tires. if​ the brake levers touch the handlebars when pressed, it​ means the brake cables are loose. Tighten them and​ check for​ wear. if​ the brake cables are frayed, have them replaced.

Chain
Proper bicycle maintenance includes regular lubrication​ of​ the chain, to​ produce smooth and​ swift movement. Use a​ de-greaser to​ remove accumulated dirt on​ the grease. Remember to​ put fresh grease on​ to​ replace the dirty grease that has been removed. Keeping your​ chain​ clean and​ well lubricated will keep it​ from getting stuck or​ jumping the gear teeth.

Keeping your​ bicycle in​ prime riding condition​ doesn't take a​ lot of​ tools or​ a​ great deal of​ technical knowledge. Bicycle maintenance is​ a​ simple task that takes only a​ little time and​ effort. Keep your​ bike fit and​ it​ will last many years keeping you​ fit.




You Might Also Like:




No comments:

Powered by Blogger.