How To Prepare Surfaces For Asset Tags And Asset Labels On Computers It
Equipment

How To Prepare Surfaces For Asset Tags And Asset Labels On Computers It Equipment



How To Prepare Surfaces For Asset Tags And Asset Labels On Computers & It Equipment
In past articles we​ have talked about what asset labels or​ asset tags are and who should be using them .​
This article is​ designed to​ show people the​ best method of​ applying asset labels or​ asset tags.
Failure to​ follow these instructions could mean that the​ labels will not work as​ expected.
The most important element of​ applying any kind of​ security adhesive based identification device is​ the​ cleanliness of​ the​ surface .​
The surface needs to​ be free of​ dirt and especially any oils or​ grease as​ this will prevent a​ good bond ever being achieved.
I have found that the​ best method of​ doing this is​ simply to​ clean the​ surface with an​ alcohol wipe .​
You can buy sachets quite cheaply .​
You simply open the​ sachet by tearing the​ top open and take the​ alcohol cloth out .​
Then,​ gently rub the​ area of​ the​ equipment where you intend to​ apply the​ label.
You will find that the​ alcohol may take 30 seconds to​ evaporate,​ however when this has completed the​ surface should be free of​ any contaminants.
Now,​ as​ these labels are highly tacky you need to​ make sure you get the​ label on​ straight because,​ in​ some grades of​ materials - especially the​ void material and the​ destructible,​ it​ is​ impossible to​ reposition them without damaging them.
Sometimes I​ recommend you mark out the​ corners with a​ little marker pen so you have a​ rough idea of​ it​ being on​ square - note,​ only do this before you wipe with alcohol as​ the​ ink in​ the​ pen itself may prevent the​ adhesive from grabbing.
The next stage is​ to​ wait .​
With vinyl destructible I’d recommend 2 hours for 40% strength,​ 1 day for 60% strength and 3 days for 100% strength .​
It really does take that long for the​ adhesive to​ cure.
I hope this has helped.




You Might Also Like:




No comments:

Powered by Blogger.