Wireless Home Security Alarm System

Wireless Home Security Alarm System



Wireless Home Security Alarm System
Depending on the​ size and​ style of​ the​ home, alarm systems can be easily installed using the​ old type of​ wired security devices .​
However, some homes use a​ wireless home security alarm system to​ make installation quick and​ easy .​
Installation of​ a​ wired system requires drilling and​ pulling wires through walls or​ into basement and​ attic areas, which can be time consuming and​ dirty work .​
Typically, this type of​ system is​ left to​ the​ professional while a​ wireless home security alarm system can be done by the​ homeowner with little effort .​
Additionally, the​ components of​ a​ wireless home security alarm system can be easily moved around the​ home to​ provide protection where it​ is​ needed .​
Adding on to​ this type of​ system is​ also easy, however every receiver has limitations on the​ number of​ devices it​ can handle and​ staying under the​ maximum acceptable number of​ devices will insure the​ system functions properly.
Every device connected to​ a​ wireless home security alarm system has a​ built in​ transmitter, which sends a​ wireless signal to​ the​ receiver .​
Most of​ the​ less expensive systems will simply sound the​ alarm when a​ device is​ activated .​
The more costly ones will not only sound the​ alarm, but also indicate which device caused it​ to​ activate .​
This is​ especially helpful when troubleshooting a​ false alarm or​ in​ figuring out in​ which room there is​ potential danger.
While the​ ease of​ installation ranks high on the​ list for​ a​ wireless home security alarm system, there are some disadvantages .​
The transmitters used in​ wireless devices operate on batteries, which will need changed frequently .​
Using motion sensor cameras can save the​ power when the​ cameras are not operating, but the​ batteries will drain periodically and​ will need to​ be changed .​
Additionally, as​ the​ battery weakens, the​ distance it​ can send the​ signal becomes shorter, creating the​ potential for​ a​ false alarm.
The construction of​ the​ house can also limit the​ distance a​ signal travels .​
While many wireless home security alarm system devices can send out a​ signal between 200 and​ 300 feet, depending on its quality, brick and​ metal walls slow the​ signals considerably .​
It is​ possible that the​ signal strength will be cut in​ half, or​ more, if​ it​ is​ trying to​ penetrate especially thick walls .​
The unit may still function properly, but if​ the​ signal cannot reach the​ receiver, the​ alarm is​ not going to​ work.
For federal, security and​ defense jobs visit www.jobsforuscitizens.com/index.php




You Might Also Like:




No comments:

Powered by Blogger.