Taking Care Of Your Tanning Bed

Taking Care Of Your Tanning Bed

All of​ us want our tanning beds to​ last as​ long as​ possible. This is​ why some people buy tanning beds that are touted to​ be durable. But tanning beds do last long and​ its lifespan can even be longer if​ the​ owners take good care of​ them.

Here are some hints and​ tips to​ expand your tanning beds life.
After each and​ every session, you need to​ do two things, “examine” and​ “clean”. You need to​ inspect the​ click strip and​ make sure that it​ is​ attached firmly. You also need to​ inspect the​ facial glass (if you’re tanning beds got one) and​ make sure that it​ has no cracks, scratches or​ any other “blemishes”. Then, you need to​ clean all the​ important areas like the​ bench and​ canopy acrylics. Use only the​ right kind of​ cleaning liquid, no alcohol or​ bleach should be used. it​ is​ also important to​ use soft non-abrasive cloth only and​ don’t forget to​ clean the​ tanning bed pillow. When tanning make sure you’re not using outdoor or​ oil-based tanning lotions because that will cause damage to​ the​ acrylic. Lastly, you must clean and​ sanitize the​ goggles for​ your own safety.

You should do the​ same thing to​ your tanning bed every time even if​ its not used much, and​ especially if​ there are many users using the​ bed. You must inspect the​ acrylics for​ cracks, wear, or​ hazing. Then, you clean the​ pillow, the​ bench, and​ the​ canopy acrylics. You must also clean and​ sanitize goggles and​ the​ bed exterior every day that the​ bed has been used. Again, use only the​ approved cleaning solution and​ supplies.
Once a​ week, aside from inspecting and​ cleaning, you must do more things to​ make sure that your tanning bed is​ and​ stays in​ top condition. the​ lamps must be dusted without using your bare hands.

Then you must remove and​ clean the​ inside of​ the​ bench and​ canopy acrylic sheets. You must wipe and​ vacuum the​ fans, vents and​ the​ vent hoses. Have a​ look and​ see if​ the​ shock tension needs to​ be adjusted. if​ it​ does, then just adjust it​ to​ the​ right tension. You also need to​ check the​ set bolts if​ these are still tight. and​ check the​ power cord and​ the​ bench-to-canopy connectors if​ these are also snug with no wear and​ tear.

The bench and​ canopy acrylics should also be checked monthly and​ the​ reflectors should be cleaned using the​ appropriate cleaning solution. Inspect the​ vent hoses for​ optimum ventilation and​ do the​ necessary adjustments if​ needed. for​ sufficient ventilation, make sure that the​ bed is​ at​ least six inches away from the​ wall or​ any freestanding items finally check the​ voltage being supplied to​ the​ bed. it​ should conform to​ the​ ones stated in​ the​ manufacturer’s guidelines. if​ you need to​ replace a​ lamp, choose replacements that meet the​ frequency recommendations.
When you do all these things with your tanning bed, then you are assured that the​ quality of​ your tanning bed will last longer and​ it​ will cost you much less to​ maintain, so it​ really is​ worth your while.

You Might Also Like:

No comments:

Powered by Blogger.