Setting Up And Securing Your Wireless Network

Setting Up And Securing Your Wireless Network



Setting Up and​ Securing Your Wireless Network
There are more and​ more individuals opting to​ work from home than ever before .​
The advantages to​ this are many including avoiding the​ morning and​ evening rush hours, being able to​ spend time with your kids and​ significant other, and​ doing everything on your own time .​
Though the​ pitfalls are many, the​ one that I​ will be focusing on in​ this article is​ that of​ setting up a​ secure wireless network for​ your home based business .​
Right now somewhere out there, there is​ someone with a​ receiver waiting to​ pick up on an​ unsuspecting person’s wireless local area network .​
Their hope is​ to​ garner some sensitive information that may lead to​ identity theft, and​ stolen proprietary business information .​
Most businesses owners are not technically inclined, though they may be power users, in​ general security settings is​ not one of​ the​ first things they want to​ mess around with in​ their day to​ day operations .​
This makes most wireless LANs a​ great target for​ information predators.
Here are some general guidelines to​ follow in​ setting up your wireless network .​
Though it​ may vary from vendor to​ vendor, the​ gist is​ more or​ less the​ same:
1 .​
Setup the​ wireless access/router point via a​ wired client.
2 .​
Always change the​ factory setting password to​ something difficult for​ someone to​ guess.
3 .​
Enable 128-bit Wired Equivalency Privacy (WEP) encryption on both your access point and​ network card .​
From time to​ time change the​ WEP key entries .​
If your hardware does not support a​ minimal of​ 128 bit WEP encryption, then it​ may be time to​ replace this dinosaur .​
WEP is​ only a​ minimal security precaution, which is​ better than none at​ all.
4 .​
Alter the​ factory default SSID on the​ access/router point to​ a​ convoluted difficult to​ guess string .​
Initiate your computer to​ connect to​ this configured SSID by default.
5 .​
Setup your access point not to​ broadcast the​ SSID if​ available.
6 .​
Block off anonymous internet requests and​ pings.
7 .​
P2P Connections should be disabled.
8 .​
Enable MAC filtering.
9 .​
Enable firewall on the​ network router/access point with demilitarized zone function disabled .​
Enable client firewalls for​ each computer in​ the​ network.
10 .​
Update router and​ access point firmware as​ updates become available.
11 .​
Make sure the​ physical router is​ hidden so that a​ random person can’t reset the​ settings.
12 .​
Position the​ physical router near the​ middle of​ the​ establishment as​ opposed to​ near windows to​ prevent others outside from receiving the​ signals.
These and​ other settings will collectively help prevent any unwanted intrusions on your private data.




You Might Also Like:




No comments:

Powered by Blogger.