Question And Answer About Ultraviolet Water Filter Systems

Question And Answer About Ultraviolet Water Filter Systems



Questions and​ Answers About Ultraviolet Water Filter Systems
Whenever you purchase an​ ultraviolet water filter system you should know that has been designed in​ such a​ way as​ to​ protect your drinking water from the​ occasional intrusion of​ microbiological contamination .​
These filters are becoming a​ lot more popular today than ever before .​
This is​ whya lot of​ people have a​ lot of​ questions about these filters.
Answers To Your Questions About Using An Ultraviolet Water Filter
There are some very common questions that people ask whenever they are thinking about purchasing an​ ultraviolet water filter .​
These questions include:
Are any chemicals required by this system? or​ is​ there anything else that I​ will need to​ add?: It is​ recommended by most manufacturers that you use a​ 5 micron sediment filter because large particles act as​ a​ haven for​ microorganisms, which is​ what you are trying to​ destroy.
Sometimes multiple sediment filters are required because of​ the​ water's turbidity .​
This is​ because color and​ suspended particles will diminish the​ transmission quality of​ any UV light .​
In these cases, a​ quality carbon filter is​ used to​ filter the​ sediment first.
Should I​ do anything before I​ install an​ ultraviolet water filter system?: You should make sure that your system (water lines, water heater, etc.) is​ clean first .​
In order to​ do this, you should disinfect the​ entire downstream system with chlorine.
How long does the​ UV bulb last?: You will need to​ replace the​ ultraviolet light bulb once every 10 to​ 12 months .​
While the​ bulb will last a​ lot longer then that, its capacity for​ neutralizing microbes will be diminished after this length of​ time and​ so you will want to​ make sure that it​ is​ changed at​ this point so that it​ can work as​ effectively as​ possible.
Why is​ the​ water cloudy/white after a​ new filter cartridge is​ installed?: This is​ because the​ water needs to​ be ran for​ a​ few minutes once a​ new ultraviolet water filter cartridge is​ installed .​
The water's cloudiness indicates that there is​ air in​ your line, housing and​ cartridge .​
This is​ normal whenever you replace a​ cartridge.
After you run the​ water for​ a​ few minutes the​ cloudy conditions will go away unless your water is​ VERY cold .​
In this case the​ oxygen in​ the​ water is​ what is​ making your water look cloudy .​
Either way, it​ is​ always a​ good idea to​ run the​ water for​ a​ few minutes after you install a​ new filter cartridge.




Related Articles:




Powered by Blogger.