Networking With Fiber Cables

Networking With Fiber Cables



Networking With Fiber Cables
Fiber cables form one of​ the​ most important parts of​ the​ networking industry today .​
Fiber cables are composed of​ one or​ more transparent optical fibers enclosed in​ a​ protective covering and​ strength members .​
Fiber cables are used to​ transmit data by the​ mode of​ light .​
Various types of​ fiber cables available are multimode duplex fiber cables, single mode simplex fiber cables, single mode duplex fiber cables, and​ plastic optical fiber cables .​
There are many fiber optic cable manufacturers who manufacture full line of​ fiber cables in​ both single mode and​ multi-mode, simples, duplex and​ multi-strand .​
Several manufacturers provide low cost, quick-turn, high volume fiber cables and​ fiber cable assembly solutions.
Cables with complete assembly of​ fibers, strength members and​ jacket refer to​ fiber cables .​
These fiber cables come in​ variety of​ forms depending upon their usability and​ place of​ use .​
It is​ important to​ identify the​ exact requirement of​ fiber cables whether they would be easy to​ install, splice or​ terminate, etc .​
This is​ necessary as​ it​ ultimately decides the​ cost of​ installing the​ fiber cables .​
Fiber cables are required to​ protect fibers from external hazards .​
Thus before installing the​ fiber cables one should always assess the​ place of​ installation of​ fiber cables .​
Fiber cables required inside the​ house or​ a​ building are not exposed too much of​ hazardous condition thus simpler form and​ not-so-tough fiber cables can be used for​ installation .​
But if​ the​ fiber cables are to​ be installed for​ longer distances and​ outside premises then the​ cables should be robust .​
They should also be installed well beneath the​ ground to​ protect them not only from ground digging, water logging but also from prairie dogs.
Fiber cables comes in​ different types based on their usage patterns as​ well .​
The zip cord and​ simplex fiber cables refer to​ those used for​ desktop connections .​
Simplex fiber cables are one fiber, tight-buffered and​ jacketed .​
a​ zip cord is​ actually two simplex fiber cables joined by a​ thin web .​
On the​ other hand fiber cables made of​ several simplex cables are breakout fiber cables .​
This type of​ fiber cables is​ strong, rugged and​ larger .​
They are also a​ bit expensive but prove to​ be economic where distances are not too long and​ fiber count required is​ less .​
Small fiber cables required for​ dry conduit run, riser or​ plenum are known as​ a​ distribution fiber cables that needs a​ breakout –box to​ be broken up or​ terminated in​ a​ panel box .​
They contain several tight-buffered fibers bundled under same jacket .​
Aerial fiber cables are good enough for​ outside installation where as​ armored fiber cables are used for​ under-ground wiring where rodents are a​ problem .​
These fiber cables have metal armoring between two jackets to​ prevent rodents from tampering the​ cabling connections.
Loose tube fiber cables are perfect for​ plant trunk applications to​ prevent fibers from moisture or​ water .​
They can be buried directly in​ ground but must be handled carefully to​ prevent damage .​
Ribbon fiber cables have twelve or​ more fiber cables packed together laid in​ a​ rows .​
They are also a​ plant fiber cables which are gel-filled and​ are good for​ water blocking .​
All fiber cable manufacturers manufacture different fiber cables but their product literatures should be carefully studied so as​ to​ assess which type of​ fiber cables they specialize in.




You Might Also Like:




No comments:

Powered by Blogger.