Guide To Hot Tub Pumps

Guide To Hot Tub Pumps

There are numerous signs of​ hot tub pump failure. Malfunctions that put off the motor from turning, including frozen shaft or​ bearings, may result in​ a​ humming noise. a​ jammed impeller can do the same, as​ can a​ faulty starting capacitor. Badly worn bearings may lead to​ a​ whining noise. Leaks around the pump often point to​ a​ failure of​ the pump seals. You will probably observe a​ puddle of​ water below the pump when these seals go badly. in​ addition, our patented hot tub pump shroud vents heat from the gear compartment. This creates a​ cooler working environment for the motors and electronic components, causative to​ a​ longer life for your Hot Spring spa.

More about the hot tub pumps

In most hot tubs, the jet pump has to​ undertake double duty, powering the hot tub jets at​ high speed and the spa filtration cycles at​ low speed. to​ give you with a​ soothing massage experience and continuously filtered water, a​ Hot Spring spa divides the work between the high-powered Wave master jet pump and our split, low-amp, SilentFlo 5000circulation pump. The Wave master jet pump is​ devoted to​ delivering the finest massages experience by producing a​ powerful flow through all the jets. And with an​ self-governing circulation hot tub pump you can enjoy the powerful jets and soothing water features, and still be assured of​ clean, heated water, 24 hours a​ day. While all Hot Spring spas are influential, our High Performance models have even higher horsepower pumps to​ power additional jets and water features.


Hot Tub Heaters take a​ lot of​ mistreatment. From the moment a​ spa is​ turned on, hot water and sanitizing chemicals are constantly rocketing through the heater. Industry surveys show that heaters are generally the first part of​ a​ spa to​ fail. It’s no surprise, since most heaters are made of​ stainless steel, which makes them exposed to​ the pitting and corrosion fatigues that lead to​ problems ranging from heat loss to​ complete system failure. That’s why Thermo-Spa builds spa heaters stronger, with one of​ the most excellent and strongest metals known to​ man - Titanium. a​ few spa manufacturers use Titanium in​ their heaters, but they cut costs by making only the heating coil out of​ this nearly indestructible metal. Thermo-Spas heater, coil and surrounding jacket are all made of​ Titanium, so the entire heater is​ resistant to​ chlorine pitting and practically impervious to​ corrosion and cracking, which is​ why Thermo-Spas heaters not only last years longer, they are also backed up with a​ much superior warranty.

Related Posts:

Powered by Blogger.