Choosing The Right Monitor A Buyers Guide

Choosing The Right Monitor A Buyers Guide

Choosing The Right Monitor - a​ Buyers Guide
There are several considerations when you plan to​ purchase a​ monitor .​

Monitor sizes are the dominant feature .​
Larger monitors are more expensive .​
Monitors are measured diagonally, though the length isn’t exactly the correct .​
It is​ almost always a​ little shorter in​ real life than the length shown .​

Resolution is​ the number of​ pixels displayed .​
This is​ normally shown as​ the number of​ pixels wide and the number of​ pixels tall the screen displays .​
The larger the numbers, the sharper the image displayed on the screen .​
Normally, a​ monitor will be able to​ display a​ range of​ resolutions with more pixels resulting in​ a​ slower refresh rate .​

Another big concern is​ LCD or​ CRT .​
LCD refers to​ Liquid Crystal Displays, and these are flat screens .​
CRT refers to​ Cathode Ray Tubes, and these are the classic television shaped monitors .​
LCD monitors produce less eyestrain typically, and have no distortion since every pixel is​ the same size and shape .​
This isn’t true for the CRT monitor, due to​ the shape of​ the glass screen .​
LCD monitors are flat, and thus take less space on the desktop .​
They last longer and consume less electricity .​
CRT monitors are able to​ change display resolutions over a​ larger range and still keep a​ sharp image .​
CRT monitors can also reach higher refresh rates with potentially noticeable results for games and multimedia .​
If the computer will be the only light in​ the room, the LCD should be better, while the CRT will work well when more than one person is​ likely to​ be viewing the screen at​ once .​

For LCD monitors, the contrast ratio is​ a​ measure of​ how easy it​ is​ to​ tell colours apart .​
Higher is​ better .​
Luminescence is​ a​ measure of​ the light given off by the screen .​
For most uses 200-250 nits is​ ideal, but for those who watch movies or​ television on their monitors, 500 nits is​ better .​
Response time is​ a​ measure of​ how quickly the monitors are able to​ refresh their image .​
16 milliseconds is​ normally sufficient, but a​ gaming machine should be more like 5 ms .​
Typically an​ LCD monitor will be harder to​ view from an​ angle, and this is​ measured in​ degrees from directly in​ front of​ the screen .​
Some come with glass screens to​ protect the LCD display from damage .​
TFT is​ Thin Film Transistor and uses transistor technology to​ improve the image .​
These TFT displays are a​ type of​ LCD display .​

For CRT monitors, refresh rate is​ one of​ the most important considerations .​
This is​ the rate at​ which the screen redraws the images .​
Rates below 70 MHz often cause eyestrain .​
75 MHz is​ the industry standard to​ avoid this issue .​
Dot pitch is​ a​ measure of​ the spaces between the pixels .​
Smaller pitch is​ better, and 0.22 mm to​ 0.26 mm is​ the range best suited for normal use .​

Another consideration is​ whether or​ not to​ use integral speakers .​
Dedicated speakers can be more powerful and higher quality than those normally built into monitors, and can be placed to​ maximize effectiveness .​
They also take up precious desk space, and unless the sound quality is​ important, the usual result is​ to​ rely on the speakers on the monitor.
Now that you have the basics on choosing your next or​ first monitor, you might want to​ check out some of​ these top manufacturers XEROX or​ HANNS G.

Related Articles:

Related Topics:

Guide News - Guide Guide - Guide Tips - Guide Advice - Guide Videos - Guide Support - Guide Questions - Guide Answers - Guide eBooks - Guide Help

Powered by Blogger.