Bungee Jumping Equipment

Bungee Jumping Equipment



Bungee Jumping Equiqment
Bungee jumping equipment comes in​ a​ variety of​ shapes and​ sizes .​
In fact, each piece of​ the​ equipment used in​ bungee jumping can have quite a​ few variations .​
It is​ a​ good idea to​ familiarize yourself with the​ equipment used in​ bungee jumping before you participate in​ a​ jump .​
This way you will know what to​ look for​ and​ what type of​ setup you would like best .​
While there are many different types of​ platforms and​ retrieval equipment, for​ the​ purpose of​ this article, we will look at​ two things that will affect your jump the​ most - the​ bungee cord, and​ the​ harness.
When talking about bungee jumping equipment, the​ bungee cord is​ one of​ the​ most important items .​
There are several variations on the​ type of​ cord that is​ used in​ bungee jumping today .​
There are braided cords, unbraided cords, pre-stretched and​ un-stretched, natural rubber, mil spec, and​ the​ Euro cord .​
These are the​ major variations in​ the​ bungee cord used in​ today's bungee jumping sports events .​
Let's take a​ minute to​ look at​ the​ characteristics of​ each one of​ these cords, and​ the​ impact that it​ has on the​ end user: the​ bungee jumper.
First, there is​ the​ military specification cord (or mil spec), which is​ manufactured to​ meet the​ requirements of​ the​ U .​
S .​
military .​
of​ course, the​ military uses it​ to​ tie down equipment, not jump from bridges and​ other tall objects! However, because of​ the​ rigorous and​ standardized testing of​ the​ mil spec, these cords work well for​ bungee jumping .​
When using mil spec cords in​ bungee jumping, they are usually grouped together to​ form a​ set, as​ one cord can typically hold around 200 pounds of​ weight .​
Each cord has a​ protective sheath on it​ to​ prevent dirt and​ foreign objects from abrading the​ cords .​
the​ downside to​ this is​ that it​ is​ not possible to​ inspect the​ ends of​ the​ cords for​ fraying and​ / or​ signs of​ failure.
Some bungee cords are pre-stretched .​
This prevents the​ cord from stretching as​ much during the​ actual jump, which provides more of​ a​ 'jerking' action and​ a​ shock as​ the​ jumper reaches the​ end of​ the​ cord length .​
These are used mostly in​ the​ northern hemisphere .​
In the​ southern hemisphere the​ commercial proponents of​ bungee jumping tend to​ use a​ natural rubber, un-stretched and​ unbraided cord .​
This provides for​ a​ lot more 'bounce' and​ a​ more smooth experience at​ the​ bottom of​ the​ jump .​
While these natural cords do not last as​ long as​ the​ mil spec cords, they do provide a​ much more comfortable jump for​ the​ average user.
The next piece of​ bungee jumping equipment that you should inquire about is​ known as​ the​ harness .​
There are two main types of​ harnesses - the​ leg harness and​ the​ body harness .​
the​ leg harness usually consists of​ a​ towel wrapped around the​ ankles with webbing tied around this in​ a​ special knot .​
the​ towel provides padding to​ help prevent injury to​ the​ ankles .​
the​ webbing is​ then attached to​ the​ bungee cord .​
the​ body harness is​ very similar to​ a​ climber's harness, and​ in​ fact, is​ many times the​ same thing .​
the​ most important aspect of​ the​ harness is​ how it​ attaches - if​ it​ is​ secure - to​ the​ bungee .​
Some accidental deaths have occurred when the​ bungee cord was attached using climbing carabineers instead of​ specialized equipment .​
It can definitely be said that bungee jumping equipment has come a​ long way since the​ vines on Pentecost Island!




You Might Also Like:




No comments:

Powered by Blogger.