A Guide To Tanning Bed Bulbs And Lamps

A Guide To Tanning Bed Bulbs And Lamps

Tanning bed lamps are used in​ every tan bed or​ suntan lamp. When purchasing new or​ used tanning beds, look at​ the​ lamps. Make sure they are good for​ tanning and​ meet FDA guidelines for​ safety. Another consideration is​ access. Be sure the​ lamps are easy to​ change when needed. Being able to​ easily perform the​ maintenance yourself is​ important when you buy a​ home bed.

There are differences in​ lamps used in​ conventional and​ high pressure beds. Make sure you are buying the​ right tanning bed lamps for​ your bed. They aren’t interchangeable. if​ purchasing replacement lighting bulbs on the​ internet, check the​ make and​ model of​ your bed carefully. Make sure the​ lamps you are buying are made for​ your bed.
High Pressure Tanning Bed Bulbs
High pressure beds use quartz lamps in​ a​ variety of​ sizes. the​ gases inside these bulbs ( http://www.tanning-beds-tips.com/tanning-bed-bulbs.html ) or​ lamps have pressure that is​ slightly higher than atmospheric pressure. in​ these beds, the​ lamps are located in​ the​ top of​ the​ bed, so you tan from above only. When you have tanned on one side of​ your body for​ about 10-12 minutes, you turn over and​ tan the​ skin on the​ other side. the​ surface of​ these beds is​ much more comfortable than a​ conventional bed.

The biggest benefit of​ these lamps is​ the​ time you need to​ spend in​ the​ bed. Since you tan faster, you need to​ spend less time in​ the​ salon. You can achieve your tan in​ about 3 weeks of​ 3-5 sessions each week. With a​ conventional bed, it​ would take at​ least a​ month to​ achieve the​ same level of​ color. Maintaining your tan is​ easier too. You only need 2-3 sessions each month to​ maintain the​ color, compared with that many sessions each week in​ a​ conventional bed. These bulbs use UVA rays only, not UVB rays which are responsible for​ burning.
Conventional Tanning Bed Lamps
Conventional beds use long, tube like lamps that resemble fluorescent tubes. the​ lamps ( http://www.tanning-beds-tips.com/tanning-bed-lamps.html ) are located on the​ top and​ bottom of​ the​ bed. All areas are tanned at​ the​ same time, without the​ need to​ change positions during the​ session.

Conventional beds use UVA and​ UVB rays in​ varying levels. Some use both and​ others use mostly UVA with a​ bit of​ UVB rays. UVA rays are responsible for​ the​ aging effects on the​ skin and​ UVB rays are the​ burning rays that cause sunburn when you are outside in​ the​ sun. It’s important to​ determine which type of​ rays your bed emits. You want to​ be sure to​ replace your existing bulbs with comparable newer lamps.

Another consideration in​ the​ type of​ bed you have at​ home or​ in​ the​ salon is​ the​ tanning bed lotion you will use. Different lotions are better for​ each type of​ bed. the​ owner of​ your tanning salon can help you choose a​ lotion that will work for​ the​ bed you are using as​ well as​ your skin type. Regardless of​ the​ bed you are using, you should always use a​ lotion. Lotions help you tan faster and​ nourish your skin.

You Might Also Like:

No comments:

Powered by Blogger.